歡迎你了解多功能彎曲機，本機器是以液壓油缸推進為動力，采用更換模具來實現多元化加工為一體的機器。

Welcome to understand the multi-function bending machine, this machine is powered by hydraulic cylinder propulsion, using the replacement of the mold to achieve a variety of processing as one of the machine,

加工后的工件分別為三角形、正方形、矩形、多邊形，加工范圍高度在150mm以內，加工厚度在14mm以內。

The processed workpieces are triangular, square, rectangular, and polygon, with processing range height within one hundred and fifty millimetey and processing thickness within fourteen millimetey.

最小內徑可控制在23mm以內。

The inner diameter can be controlled within twenty-three millimetey

沖孔模具可以加工圓形孔，方形孔，矩形孔等形狀 同時還可以加工圓管豁口，更多更多說明請參考技術方案

Punch mold can be processed circular holes, square holes, rectangular holes and other shapes can also be processed circular pipe gap, for more instructions, please refer to the technical scheme

切斷模具可以加工厚度14mm板寬135mm以內的型材。長度可以定點控制

Cutting molds can process profiles with a thickness of fouteen millimetey and one hundred and thirty-five millimetey . Length can be fixed-point control

型材切斷模具可以切斷方管，圓管和角鋼

Section cutting mold can cut off the square pipe, round pipe and corner steel

彎圓管模具可以加工直徑在48mm以內的管材。圓R的控制是靠推進模具控制

Round pipe molds can process pipes within forty-eight millimetey in diameter. The circular arc is controlled by advancing the mold

校平模具可以校正各內型材，他的優點是可以矯正也可以彎曲一定的弧度。

The leveling mold can correct each internal profile, and its advantage is that it can correct or bend a certain radian.

縮管模具可以加工不同的管子，不同管子而且只需要一個收縮模具。

The shrink mold can process different tubes, different tubes and it only need one shrink mold.

機器工作臺采用高強度鋼材回火處理不變形，液壓元件采用YUKEN,電器采用Schneider電器元件，重復精度控制在0.05mm

The machine bench adopts high strength steel tempering treatment without deformation, hydraulic components use yuken, electrical appliances use schneider electrical components, repetition accuracy is controlled at zero point zero five millimetey

該機器只需要更換不同的模具就可以加工各類型材，功能強大，投資少

The machine only needs to replace different molds can process all kinds of profiles, powerful function, less investment

壓力控制采用遠程調壓閥控制，

Pressure control using a remote pressure regulator control,

機器采用模塊化組合，操作界面有中文模式和英文模式，控制方式有手動模式，半自動模式和全自動模式。

The machine adopts the modular combination, the operation interface has the Chinese mode and the English mode, the control mode has the manual mode, the semi-automatic mode and the fully automatic mode.

電源電壓采用380V50HZ,如果需要特殊模具和特殊電壓請聯系我們經銷商

Power supply voltage is three hundred and eighty volts  fifty hertz. If special mold and special voltage are required, please contact our dealer

折彎   卷板     沖孔   剪板     擴管     切方管     切角鐵    彎方管      校平

Plate bending  plate rolling  piercing; punching  Cut the board pipe expanding

Cut square tube

Cut Angle iron

Bend square tube

Bend round tube

Straightening